P2619: Crankshaft Position Signal Output Circuit High
Code P2619 means “Crankshaft Position Signal Output Circuit High.” It’s listed under ECU and output circuits. Here’s whether you can keep driving, what usually causes it, and what to check before replacing parts.
Common causes of P2619
- Crankshaft or camshaft position sensor
- Stretched or jumped timing chain or belt
- Variable valve timing actuator (VVT)
- Low oil level or pressure (VVT actuator)
What to check, from cheapest to most expensive
- Check the oil level and condition
- Check crank/cam correlation in live data
- Inspect the timing chain or belt if the code persists
A code tells you what the ECU detected, not which part is bad. Confirm it with live data before replacing anything.
Related codes
P2612A/C Refrigerant Distribution Valve Control Circuit LowP2613A/C Refrigerant Distribution Valve Control Circuit HighP2614Camshaft Position Signal Output Circuit/OpenP2615Camshaft Position Signal Output Circuit LowP2616Camshaft Position Signal Output Circuit HighP2617Crankshaft Position Signal Output Circuit/OpenP2618Crankshaft Position Signal Output Circuit LowP2620Throttle Position Output Circuit/Open