P2105: Throttle Actuator Control System - Forced Engine Shutdown
Code P2105 means “Throttle Actuator Control System - Forced Engine Shutdown.” It’s listed under fuel, air, and exhaust aftertreatment (particulate filter, AdBlue, NOx). Here’s whether you can keep driving, what usually causes it, and what to check before replacing parts.
Common causes of P2105
- Dirty throttle body
- Throttle or accelerator pedal position sensor
- Connector or wiring
What to check, from cheapest to most expensive
- Clean the throttle body and run the relearn procedure
- Watch both position signals in live data
A code tells you what the ECU detected, not which part is bad. Confirm it with live data before replacing anything.
Related codes
P2101Throttle Actuator Control Motor Circuit Range/PerformanceP2102Throttle Actuator Control Motor Circuit LowP2103Throttle Actuator Control Motor Circuit HighP2104Throttle Actuator Control System - Forced IdleP2106Throttle Actuator Control System - Forced Limited PowerP2107Throttle Actuator Control Module ProcessorP2108Throttle Actuator Control Module PerformanceP2109Throttle/Pedal Position Sensor 'A' Minimum Stop Performance