P0681: Cylinder 11 Glow Plug Circuit
Code P0681 means “Cylinder 11 Glow Plug Circuit.” It’s listed under ECU and output circuits. Here’s whether you can keep driving, what usually causes it, and what to check before replacing parts.
Common causes of P0681
- Worn or broken spark plug
- Ignition coil or its connector
- That cylinder’s injector leaking or not opening
- Low compression (valves, piston rings, head gasket)
What to check, from cheapest to most expensive
- Swap the coil with another cylinder’s and see if the misfire follows it
- Check the spark plugs and their gap
- Run a compression test on the cylinder
- Watch each cylinder’s misfire counter in live data
A code tells you what the ECU detected, not which part is bad. Confirm it with live data before replacing anything.
Related codes
P0680Cylinder 10 Glow Plug CircuitP0682Cylinder 12 Glow Plug CircuitP0683Glow Plug Control Module to PCM Communication CircuitP0684Glow Plug Control Module to PCM Communication Circuit Range/PerformanceP0685ECM/PCM Power Relay Control Circuit /OpenP0686ECM/PCM Power Relay Control Circuit LowP0687ECM/PCM Power Relay Control Circuit HighP0688ECM/PCM Power Relay Sense Circuit /Open